Setup and Validation of MC4E Digital Input
How the MC-4E’s digital input works There are two possible types of installation deployments: 3-Wire VBUS The MC-4E’s digital input works identically in either installation
Category: Installation
Instructions and schematics for getting the physical tracking devices up and running.
Pacific Track PT40 Harnesses
PT4S9GN15 Molex to 9-pin green (plugs into green and black 9-pin vehicle ports) PT4S6GY15 Molex to 6-pin grey PT4SOL15 Molex to OBD-II cable (light-/medium-duty) 1.5m
Morey Harness Product Line
With Morey’s Harness Product Line, you can connect our devices to any asset in your fleet. Because of the complex layer of connectors and choices
Temeda MC-4
Features Key Device Features 50-Channel GPS Receiver Network certified on multiple carriers Sprint (CDMA), Verizon (CDMA), AT&T (HSPA 3G) Internal or external antennae options Satellite
Install Verification ECM
This document outlines the recommended install verification procedure for Telematics Devices that are connected to an Asset’s Engine Control Module. This procedure should be completed
MC-3 and MC-4 Install Verification Process
This page is intended to outline the recommended install verification procedure for MC-3 and MC-4. This procedure should be completed after completing the steps in
Installing the MC-3E
Installation Installing the MC-3E is easy. Our training video will help you install your device with a 3-wire harness. From the Morey Connect series of telematics