Alert Types

There are several different alerts available for each asset. More information about alerts can be found here.

Asset Activity & Movement

Off Hours Usage

This alert will trigger when an asset sends an “In Motion” or “Running” event during a customizable “Off Hours” schedule.

Ignition On/Engine Running

This alert will trigger when an asset sends an “Ignition On” or “Running” event during a customizable schedule.

Movement Started

This alert is triggered whenever an asset sends a “Motion Start” event.

Movement Stopped

This alert is triggered whenever an asset sends a “Motion Stop” event.

No Activity/Motion

This alert is triggered if an asset has no movement during the duration of a customizable schedule.

Extended Stop

This alert is triggered if an asset hasn’t moved for a set amount of time.

Tow Event Detected

This alert is triggered when an asset sends a “Tow Event” message.

Camera

Camera (Shock, Panic, Harsh Driving)

This alert is triggered when a camera device sends a Shock event, Panic button event, or Harsh Driving Event.

Camera – Severe Shock

This alert is triggered when a video telematics product meets the Severe Shock threshold defined by the fleet admin.

Camera – Distracted Driver

This alert is triggered when a video telematics product detects a distracted driver event.

Driver Safety

Top Speed

This alert is triggered whenever an asset exceeds a customizable Top Speed threshold.

Speed Limit

This alert is triggered when an asset exceeds the speed limit of the street by a customizable amount.

Erratic Driving (Hard Accel, Brake, Maneuver)

This alert is triggered when an asset performs a harsh maneuver, harsh brake, or harsh acceleration. Please contact our customer support team for help programming your telematics devices.

Harsh Acceleration

This alert is triggered when an asset performs a harsh acceleration. Please contact our customer support team for help programming your telematics devices.

Harsh Braking

This alert is triggered when an asset performs a harsh brake. Please contact our customer support team for help programming your telematics devices.

Harsh Maneuver

This alert is triggered when an asset performs a harsh maneuver. Please contact our customer support team for help programming your telematics devices.

Engine Data

Engine RPM

This alert is triggered when an asset’s RPM exceeds a customizable threshold.

Engine Coolant Temp

This alert is triggered when an asset’s coolant temperature exceeds a customizable threshold.

Asset Battery Voltage Low

This alert is triggered when an asset’s battery drops below a customizable threshold.

Asset Battery Voltage High

This alert is triggered when an asset’s battery voltage exceeds a customizable threshold.

Fuel & Idle

Fuel Level Low Alert

This alert is triggered when an asset’s fuel level drops below a customizable threshold.

Idle Occurrence

This alert is triggered when an asset’s engine is running in a stationary position for longer than a customizable time limit. The device must be programmed to send Idle Events. Please contact the Temeda Customer support team for assistance with programming your devices to send idle events.  

Idle Daily Limit

This alert is triggered after the cumulative amount of time an asset spends not in motion exceeds a customizable threshold for the day.

GPS/ Telematics Device

GPS Device Battery % Low

This alert is triggered when a Telematics device’s internal battery falls below a customizable threshold.

GPS Device Battery Voltage Low

This alert is triggered when the voltage of a device’s battery falls below a customizable threshold.

GPS Device Temp Sensor Low

This alert is triggered when a MC-1’s temperature sensor detects a temperature below a customizable threshold.

GPS Device Temp Sensor High

This alert is triggered when a MC-1’s temperature sensor detects a temperature above a customizable threshold.

GPS Device Not Reporting

This alert is triggered when a device stops sending messages for a customizable amount of time.

Power On

This alert is triggered when a telematics device sends a “Power On” message.

Power Loss

This alert is triggered when a telematics device sends a “Power Loss” message.

Locations & Zones

A note about locations and zones: A Location or zone is a geo-fence that is created using the Temeda application.

Location Entry

This alert is triggered when an asset enters a Location.

Location Exit

This alert is triggered when an asset exits a Location.

Location In/Out

This alert is triggered when an asset exits or enters a Location.

Location Stop

This alert is triggered when an asset sends a motion stop event inside a Location.

Time Exceeded within Location(s)

This alert is triggered when an asset exceeds a customizable threshold for the amount of time in a Location.

Time Exceeded & No Motion Outside Location(s)

This alert is triggered when an asset stops outside of a location for longer than a time-limit set by the person who creates the alert. This alert is meant to notify fleet managers when an asset is making a stop outside of a jobside for an extended period of time.

Zone Entry

This alert is triggered when an asset enters a zone.

Zone Exit

This alert is triggered when an asset exits a zone.

Zone Stop

This alert is triggered when an asset sends a “Motion Stop” Event in a zone.

Maintenance

Maintenance Due/Overdue

This alert is triggered when maintenance is due and when it is overdue.

Maintenance Due

This alert is triggered and maintenance is due.

Maintenance Overdue

This alert is triggered and maintenance is overdue.

Check Engine/ Diagnostic (DTC)

This alert is triggered when a device transmits a diagnostic troublecode being triggered by the asset.

Failed Inspection

The Asset Failed Inspection Alert is triggered when an asset fails an Inspection.

Sensors

Sensor Active

This alert is triggered when a binary sensor’s circuit closes.

Temperature Sensor High

This alert is triggered when a CalAmp’s temperature sensor detects a temperature above a customizable threshold.

Temperature Sensor Low

This alert is triggered when a CalAmp’s temperature sensor detects a temperature below a customizable threshold.